HP Visualize J7000 hp Visualize J5000, J7000 workstations parts removal and re - Page 35
Removing and Replacing the DDS-3 Tape Drive
View all HP Visualize J7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Parts Removal and Replacement Removing and Replacing the DDS-3 Tape Drive Removing and Replacing the DDS-3 Tape Drive This section describes how to remove and replace the DDS-3 tape drive. NOTE Prior to removing the DDS-3 Drive, the Front, Top, and Left Side panels need to be removed. See the appropriate section(s) for removing and replacing these components. Removing the DDS-3 Tape Drive 1. Remove the two T-15 Torx screws securing the DDS-3 tape drive to the front panel of the workstation. (See ) Figure 2-30. Removing the Torx Screws T-15 Torx Screw T-15 Torx Screw 2. Remove the thin, metal EMI (electromagnetic interference) cover, which is snapped in place above the DDS-3 drive bay. Figure 2-31. Removing the EMI Cover DDS Drive's EMI Cover Chapter 2 35