HP Visualize J7000 hp Visualize J5000, J7000 workstations parts removal and re - Page 43
Removing and Replacing the I/O Board
![]() |
View all HP Visualize J7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Parts Removal and Replacement Removing and Replacing the I/O Board Removing and Replacing the I/O Board This section describes how to remove and replace the I/O Board. NOTE Prior to removing the I/O Board, the Front, Top, and Left Side panels, the Power Supply, the PCI Retainer Clip, and PCI I/O Cards need to be removed. See the appropriate section(s) for removing and replacing these components. Replacing the I/O Board Removing the I/O Board 1. Remove the cables from the USB Clip from the back of the Workstation. Figure 2-41. Opening the USB Clip Keyboard and Mouse connectors. Insert a fingernail under the locking lever of the USB clip . Lift up. 2. Disconnect all cables and SCSI terminators from the back of the system. 3. Remove the two T-15 Torx screws that secure the I/O board to the back of the workstation. Chapter 2 43
![](/manual_guide/products/hewlettpackard-visualize-j5000-hp-visualize-j5000-j7000-workstations-parts-removal-replacement-guide-a497890051-1a5e502/43.png)