HP Visualize c3000 hp Visualize b1000, c3000, c3600 workstations parts replace - Page 28
Removing the Front-Panel Display
View all HP Visualize c3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Parts Removal and Replacement Removing the Front-Panel Display Removing the Front-Panel Display Figure 2-23. Front Panel Display T-15 Torx Screw Power Switch 25-pin Connector T-15 Torx Screw Front-Panel Display Release Tab 1. Remove the two T-15 Torx screws that secure the front-panel display's connector. 2. Unplug the ribbon cable's 25-pin connector from its socket. 3. The power switch/LCD assembly has two chassis hooks on the left side and a release tab on the right side. Squeeze the release tab (push it toward the power switch) until it releases from the chassis, and then rotate the bracket left and outward to lift the hooks out of the chassis slots. 28 Chapter 2
28
Chapter 2
Parts Removal and Replacement
Removing the Front-Panel Display
Removing the Front-Panel Display
Figure 2-23. Front Panel Display
1.
Remove the two T-15 Torx screws that secure the front-panel display’s connector.
2.
Unplug the ribbon cable’s 25-pin connector from its socket.
3. The power switch/LCD assembly has two chassis hooks on the left side and a release
tab on the right side. Squeeze the release tab (push it toward the power switch) until it
releases from the chassis, and then rotate the bracket left and outward to lift the hooks
out of the chassis slots.
T-15 Torx Screw
Release Tab
Front-Panel
T-15 Torx Screw
Power Switch
25-pin Connector
Display