HP WF1907 User Guide 1506, 1706 and 1906 LCD Monitors - Page 21
Mounting the Monitor, used for mounting purposes. These mounting holes are - take apart
UPC - 882780774438
View all HP WF1907 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Setting Up the Monitor 3. Remove the three screws 2 as shown in the following illustration. Removing the Monitor Base Ä CAUTION: Ensure that the bottom of the monitor base is positioned over a table or desktop before removing the base from the monitor. 4. Remove the monitor base 3 from the monitor. Mounting the Monitor 1. Remove the monitor base. Refer to "Removing the Monitor Base" steps in the previous section. After the base is removed from the monitor, four threaded mounting holes are exposed on the monitor back panel to be used for mounting purposes. These mounting holes are 100mm apart and are compliant with the Video Electronics Standards Association (VESA) standard for mounting flat panel displays. User Guide 3-7
Setting Up the Monitor
User Guide
3–7
3. Remove the three screws
2
as shown in the following
illustration.
Removing the Monitor Base
Ä
CAUTION:
Ensure that the bottom of the monitor base is positioned
over a table or desktop before removing the base from the monitor.
4. Remove the monitor base
3
from the monitor.
Mounting the Monitor
1. Remove the monitor base. Refer to “Removing the Monitor
Base” steps in the previous section.
After the base is removed from the monitor, four threaded
mounting holes are exposed on the monitor back panel to be
used for mounting purposes. These mounting holes are
100mm apart and are compliant with the Video Electronics
Standards Association (VESA) standard for mounting flat
panel displays.