HP Workstation xw6000 HP Workstations for Linux - User Guide - Page 29

LSI WebBIOS - Adapter selection, LSI WebBIOS - Main screen

Get HP Workstation xw6000 PDF manuals and user guides View all HP Workstation xw6000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Use the following steps as a guide to set up the LSI 8344ELP or the LSI 8888ELP or SAS RAID. Details will vary based on the specific configuration used. 1. Boot the workstation, and when prompted, press CTRL-H to enter LSI's WebBIOS utility. WebBIOS will be run after POST completes. Select the desired adapter from the Adapter Selection screen and press start to enter the utility. Figure 6-8 LSI WebBIOS - Adapter selection 2. The main WebBIOS screen can be used to configure the adapter, the physical disks, and the virtual disks or RAID arrays. The first view shows the physical disks connected to the adapter, any RAID arrays presently configured, as well as the status of both physical and virtual disks. Figure 6-9 LSI WebBIOS - Main screen ENWW LSI 8344ELP and LSI 8888ELP Setup 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Use the following steps as a guide to set up the LSI 8344ELP or the LSI 8888ELP or SAS RAID. Details
will vary based on the specific configuration used.
1.
Boot the workstation, and when prompted, press CTRL-H to enter LSI’s WebBIOS utility. WebBIOS
will be run after POST completes. Select the desired adapter from the Adapter Selection screen
and press start to enter the utility.
Figure 6-8
LSI WebBIOS – Adapter selection
2.
The main WebBIOS screen can be used to configure the adapter, the physical disks, and the virtual
disks or RAID arrays. The first view shows the physical disks connected to the adapter, any RAID
arrays presently configured, as well as the status of both physical and virtual disks.
Figure 6-9
LSI WebBIOS – Main screen
ENWW
LSI 8344ELP and LSI 8888ELP Setup
25