HP Xw460c GbE2c Ethernet Blade Switch for HP c-Class Quick Setup Instructions - Page 1
HP Xw460c - ProLiant - Blade Workstation Manual
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
GbE2c Ethernet Blade Switch for HP c-Class Quick Setup Instructions Overview This card contains information on how to set up the contents of the kit for your use. For more information on switch installation and to download management utilities and firmware, see the HP website (http://www.hp.com/go/bladesystem/documentation). Kit contents • One Ethernet Blade Switch for HP c-Class BladeSystem • This installation card • Limited warranty and material limitations documentation Preparing for installation IMPORTANT: Before installing the interconnect switch, make a record of the Media Access Control (MAC) address (printed on the MAC address label attached to your interconnect switch). You might need this address when you configure your interconnect switch. Interconnect switch front panel © Copyright 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. March 2006 (First edition) Part Number 418120-001