HP Xw6200 HP xw and Z Series Workstations - Installing an HP Solenoid Lock and - Page 1

Installing an HP Solenoid Lock and Hood Sensor Introduction The side access panel Solenoid Lock is designed to prevent unauthorized removal of the computer cover. The side access panel may be locked by using a local or remote signal-controlled solenoid. The Hood Sensor is designed to notify the user of any removal of the computer cover. Kit contents ● Solenoid Lock assembly, including solenoid, bracket, and cable ● Two tamper-resistant screws ● Solenoid Lock FailSafe Key ● Sensor and power cable ● Sensor bracket ● Two sensor bracket screws ● Warranty information ● This installation guide Before you begin To determine the compatibility of this product with your HP computer, see QuickSpecs online at http://www.hp.com/go/productbulletin. Installing the Solenoid Lock and Hood Sensor in HP Workstations Installations in HP Workstations, such as the HP Z600 Workstation series, may be different. Complete installation and removal procedures for this product are included in the service guide for your workstation model, available at http://www.hp.com/support/manuals. © 2004-2010 Hewlett-Packard Development Company, L.P. Printed in the U.S. ENWW Introduction 1