HP Xw6600 HP xw and Z Series Workstations - SATA Optical Drive Installation - Page 1

HP Xw6600 - Workstation - 2 GB RAM Manual

Page 1 highlights

SATA optical drive installation This document describes how to install a standard 5.25-inch, half-height Serial ATA (SATA) optical drive in your HP workstation. Kit contents ● 13.335 cm (5.25 inch), half-height SATA optical drive ● SATA interface cables ● Four M3 guide screws ● Optional application software CD (based on optical drive) ● Warranty information Tools required ● T-15 Torx screwdriver ● Flat-blade screwdriver Before you begin To view QuickSpecs and determine the compatibility of this product with your HP workstation, see http://www.hp.com/go/productbulletin. © 2007-2009 Hewlett-Packard Development Company, L.P. Microsoft Window XP and Windows Vista are U.S. registered trademarks of Microsoft Corporation. Printed in the U.S. ENWW Kit contents 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

SATA optical drive installation
This document describes how to install a standard 5.25-inch, half-height Serial ATA (SATA) optical drive
in your HP workstation.
Kit contents
13.335 cm (5.25 inch), half-height SATA optical drive
SATA interface cables
Four M3 guide screws
Optional application software CD (based on optical drive)
Warranty information
Tools required
T-15 Torx screwdriver
Flat-blade screwdriver
Before you begin
To view
QuickSpecs
and determine the compatibility of this product with your HP workstation, see
go/productbulletin
.
© 2007–2009 Hewlett-Packard Development Company, L.P. Microsoft
Window XP and Windows Vista are U.S. registered trademarks of Microsoft
Corporation. Printed in the U.S.
ENWW
Kit contents
1