HP Z24i User Guide - Page 23
Selecting a faster response time, Selecting the Low Blue Light mode, Image Control, Response Time
View all HP Z24i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Selecting a faster response time 1. Press the Menu button to open the OSD. 2. Select Image Control and then select Response Time. 3. Select one of the following levels from the Response Time menu: Level 1 (Default) Level 2 (Fast) Level 3 Level 4 Level 5 (Fastest) NOTE: The default response time is 14.0 ms. The response time can be adjusted to as fast as 5.4 ms in the display menu. All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. Selecting the Low Blue Light mode Decreasing the blue light emitted by the display reduces the blue light exposure to your eyes. HP monitors provide settings to reduce the blue light output and create a more relaxing and less stimulating image while you view content on the screen. To adjust your monitor to a comfortable viewing light, follow the steps below. 1. Press one of the four OSD bezel buttons on the bottom of the monitor to display the OSD icons on the screen. 2. Press the Viewing Modes button to open the Viewing Modes menu, or press the Menu button, select Color Control, and then select Viewing Modes. 3. Choose one of the following settings: ● Low Blue Light (TUV certified): Reduces blue light for improved eye comfort ● Reading: Optimizes both blue light and brightness for indoor viewing ● Night: Adjusts the monitor to the lowest blue light output WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, and proper posture, health, and work habits for computer users. The Safety & Comfort Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is available on the Web at http://www.hp.com/ergo. Selecting a faster response time 17