HP Z32 User Guide - Page 13
Input Control, USB-C, × 2160 @ 60 Hz + USB 2.0, For a USB Hub
View all HP Z32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
● For a USB Hub: Connect the Type-C end of a USB cable to a USB Type-C port on the monitor and the other end to a USB Type-A port on the source device. ● For DisplayPort Alt-mode: Connect the Type-C end of a USB cable to a USB Type-C port on the monitor and the other end to a USB Type-C port on the source device. NOTE: To set the video input source to USB-C, press the Menu button on the monitor's rear panel, select Input Control, and then select USB-C Configuration. ● Select the option 3840 × 2160 @ 60 Hz + USB 2.0 for a higher vertical refresh rate and a lower USB speed. -or- ● Select the option 3840 × 2160 @ 30 Hz + USB 3.0 for a lower vertical refresh rate and a higher USB speed. Setting up the monitor 7
●
For a USB Hub:
Connect the Type-C end of a USB cable to a USB Type-C port on the monitor and the other end to a
USB Type-A port on the source device.
●
For DisplayPort Alt-mode:
Connect the Type-C end of a USB cable to a USB Type-C port on the monitor and the other end to a
USB Type-C port on the source device.
NOTE:
To set the video input source to USB-C, press the
Menu
button on the monitor’s rear panel,
select
Input Control
, and then select
USB-C
Configuration
.
●
Select the option
3840 × 2160 @ 60 Hz + USB 2.0
for a higher vertical refresh rate and a lower USB
speed.
–or–
●
Select the option
3840 × 2160 @ 30 Hz + USB 3.0
for a lower vertical refresh rate and a higher USB
speed.
Setting up the monitor
7