HP ZR22w HP ZR22w and ZR24w LCD Monitors User Guide - Page 32
Table 4-2, Main Menu, Submenu, Description - refresh rate
View all HP ZR22w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Table 4-2 OSD Menu (continued) Icon Main Menu Information Factory Reset Source Control Exit Submenu Current Settings Recommended Settings Serial Number FW Version Backlight Hours Service Support DisplayPort DVI VGA Default Source Auto-Switch Source Source Detection Description Selects and displays important information about the monitor. Provides the current input video mode. Provides the recommended resolution mode and refresh rate for the monitor. Reports the serial number of the monitor. The serial number is needed if contacting HP technical support. Reports the firmware version of the monitor. Reports the total hours of backlight operation. http://www.hp.com/support Returns all OSD menu settings and DDC/CI controls to the factory default settings, except the Language. Selects the video input signal. DisplayPort is the factory default. Selects DisplayPort as the video input signal. Selects DVI as the video input signal. Selects VGA as the video input signal. Selects the default or primary video input signal when the monitor is connected to two active and valid video sources. The monitor will automatically determine the video format. The choices are: ● DisplayPort ● DVI ● VGA The factory default is DisplayPort. Turns the system's automatic video signal input to On or Off. The factory default is On. This option is displayed in the OSD when a DisplayPort input is selected. You can set Source Detection to: ● Always Active ● Low Power The factory default is Low Power. Exits the OSD menu screen. 24 Chapter 4 Operating the Monitor ENWW