HP dx2480 Hardware Reference Guide: HP Compaq dx2480 Business Desktop MIcrotow - Page 55
HP dx2480 - Microtower PC Manual
View all HP dx2480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Description IDE Channel 0 Master This allows you to detect the device. IDE Channel 1 Master Also it allows you to set the IDE deviceto: • None • Auto(default) • Manual Access Mode This allows you to set the access mode to: • CHS • LBA • Large • Auto(Default) Also,this allows you to see the Hard disk information. (view only): • Capacity • Cylinder • Head • Precomp • Landing Zone • Sector Halt On Allows you to set at: • All errors • No errors • All,but Keyboard SATA Controller This allows you to set for: • Disabled • Enabled (default) LEGACY Mode support This allows you to set for: • Enabled (default) • Disabled ! Support for specific Computer Setup options may vary depending on the hardware configuration Computer Setup (F10) Utility Guide www.hp.com/in 7-5