HP dx2480 Hardware Reference Guide: HP Compaq dx2480 Business Desktop MIcrotow - Page 56

Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Description Advanced BIOS Features Quick Power On Self Test Disables/enables the system to skip certain tests while booting. Enabling this feature decreases the time required to boot the system. Hard Disk Boot Priority Allows you to specify the order of hard drive devices. The first drive in the order has priority in boot sequence and is recognized as drive C (if any device attached). CDROM Boot Priority First Boot Device Second Boot Device Third Boot Device Boot Other Device APIC Mode Security Option F7 (Diagnostic) Support Allows you to change the ODD order Allows you to specify which devices will boot first, second, and third, or to disable Disables/enables boot other device. Disables/enables the APIC mode. Setup System Allows to Enable / Disable the BIOS diagnostic tool F11 Prompt Allows to Enable/disable the ability to F11 support ( Recovery option). Advanced Chipset Features PEG/onchip VGA controller This allows you to set the first initiation the monitor display: • Onchip VGA • PEG Port • Auto(default) On-chip Frame Buffer Size Allow you to ser On-Chip Frame Buffer size to • 1MB • 8MB DVMT Mode Allows you to set DVMT Mode to: • Fixed • DVMT ! Support for specific Computer Setup options may vary depending on the hardware configuration Computer Setup (F10) Utility Guide www.hp.com/in 7-6