HP dx6050 HP Business Desktop d300 and dx6050 Series Personal Computers Servic - Page 166
Front I/O Devices, From the inside of the chassis
View all HP dx6050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Removal and Replacement Procedures- Desktop (DT) Chassis 8.11 Front I/O Devices 1. Prepare the computer for disassembly (Section 8.1, "Preparation for Disassembly"). 2. Remove the computer cover (Section 8.5, "Computer Cover"). 3. Disconnect the two I/O device cables from the system board: the front USB cable pair and the front audio cable. 4. Remove the 5.25" drives from their bays to gain access to the I/O device (Section 8.10.2, "Removing a Drive"). 5. From the inside of the chassis, remove the two screws that secure the I/O device to the chassis 1, then pull the device into the chassis 2 to free it from its mount. To install the housing assembly, reverse the removal procedures. 8-24 319865-008 Service Reference Guide, d300, dx6050
8–24
319865-008
Service Reference Guide, d300, dx6050
Removal and Replacement Procedures— Desktop (DT) Chassis
8.11 Front I/O Devices
1. Prepare the computer for disassembly (
Section 8.1, “Preparation for Disassembly”
).
2. Remove the computer cover (
Section 8.5, “Computer Cover”
).
3. Disconnect the two I/O device cables from the system board: the front USB cable pair and
the front audio cable.
4. Remove the 5.25" drives from their bays to gain access to the I/O device (
Section 8.10.2,
“Removing a Drive”
).
5. From the inside of the chassis, remove the two screws that secure the I/O device to the
chassis
1
, then pull the device into the chassis
2
to free it from its mount.
To install the housing assembly, reverse the removal procedures.