HP nx6315 HP Compaq nx6315, nx6325 Notebook PC - Maintenance and Service Guide - Page 135
from the clip in the base, Remove the modem connector
View all HP nx6315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Removal and Replacement Procedures 2. Remove the two Phillips PM2.5×4.0 screws 1 that secure the modem module to the system board. 3. Lift the front of the modem module 2 to disconnect it from the system board. 4. Disconnect the modem module cable 3 from the modem module. 5. Disconnect the modem cable 4 from the system board. 6. Remove the modem connector 5 from the clip in the base enclosure. ✎ The modem module cable is included with the modem module spare part kit and is also available in the Cable Kit, spare part number 430883-001. Removing the Modem Module and Cable Reverse the above procedure to install the modem module. Maintenance and Service Guide 5-45
Removal and Replacement Procedures
Maintenance and Service Guide
5–45
2.
Remove the two Phillips PM2.5×4.0 screws
1
that secure the
modem module to the system board.
3. Lift the front of the modem module
2
to disconnect it from
the system board.
4. Disconnect the modem module cable
3
from the
modem module.
5. Disconnect the modem cable
4
from the system board.
6. Remove the modem connector
5
from the clip in the base
enclosure.
✎
The modem module cable is included with the modem module
spare part kit and is also available in the Cable Kit, spare part
number 430883-001.
Removing the Modem Module and Cable
Reverse the above procedure to install the modem module.