HP q1335a User Manual - Page 103
Cleaning the pickup roller, Using a dry, lint-free cloth
View all HP q1335a manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Cleaning the pickup roller If you want to clean the pickup roller rather than replace it, follow the instructions below: 1 Remove the pickup roller as described in steps 1 through 5 of Changing the pickup roller. 2 Dab a lint-free cloth in isopropyl alcohol, and scrub the roller. WARNING! Alcohol is flammable. Keep the alcohol and cloth away from an open flame. Before you close the printer and plug in the power cord, allow the alcohol to dry completely. 3 Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt. 4 Allow the pickup roller to dry completely before you reinstall it in the printer (see steps 6 through 9 of Changing the pickup roller). ENWW Cleaning the pickup roller 95
ENWW
Cleaning the pickup roller 95
Cleaning the pickup roller
If you want to clean the pickup roller rather than replace it, follow the instructions below:
1
Remove the pickup roller as described in steps 1 through 5 of
Changing the pickup roller
.
2
Dab a lint-free cloth in isopropyl alcohol, and scrub the roller.
WARNING!
Alcohol is flammable. Keep the alcohol and cloth away from an open flame. Before you close the
printer and plug in the power cord, allow the alcohol to dry completely.
3
Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.
4
Allow the pickup roller to dry completely before you reinstall it in the printer (see steps 6
through 9 of
Changing the pickup roller
).