HP q1335a User Manual - Page 125
Labels, Transparencies, Label construction
View all HP q1335a manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Labels Label construction When selecting labels, consider the quality of the following components: ● Adhesives: The adhesive material should be stable at 200° C (392° F), the printer's maximum temperature. ● Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. ● Curl: Prior to printing, labels must lie flat with no more than 13 mm (0.5 in.) of curl in any direction. ● Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. Transparencies Transparencies must be able to withstand 200° C (392° F), the printer's maximum temperature. ENWW Guidelines for using media 117
ENWW
Guidelines for using media 117
Labels
Label construction
When selecting labels, consider the quality of the following components:
●
Adhesives:
The adhesive material should be stable at 200° C (392° F), the printer’s
maximum temperature.
●
Arrangement:
Only use labels with no exposed backing between them. Labels can peel off
sheets that have spaces between the labels, causing serious jams.
●
Curl:
Prior to printing, labels must lie flat with no more than 13 mm (0.5 in.) of curl in any
direction.
●
Condition:
Do not use labels with wrinkles, bubbles, or other indications of separation.
Transparencies
Transparencies must be able to withstand 200° C (392° F), the printer’s maximum temperature.