HP t150 HP MultiSeat Computing Solution - Page 3
Topology - driver
View all HP t150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Normal Normal mode is the default mode. Users normally log in and perform individual task on each station in Normal mode. Each session runs a separate RDP session. Software updates and driver installations should not be performed in Normal mode. Associate MultiSeat uses an auto-mapping function to associate each attached MultiSeat t100 series workstation. If the auto-mapping function fails to work, then the user can manually associate their workstation with this function. Auto-mapping does not apply to the host PC station. The Associate mode could be used to reconfigure the host PC station's association if the configuration has changed (for example, if the host station's mouse and keyboard were moved to a different port or USB hub.) Topology • Windows MultiPoint Server 2010 does not support audio/microphone or PS/2 keyboard/mouse from the host system. • All HP MultiSeat t100 series client devices are connected by USB cable directly to the host system. ⎯ The MultiSeat t100 series client device has ports for PS/2 keyboard/mouse, microphone, earphones, and a VGA monitor. NOTE The maximum cable length supported by USB 2.0 specification is 5 meters. Topology Examples • 6 sessions: 5 HP MultiSeat t100 series clients connected directly to the host station + host (no microphone/no audio) • 8 sessions: 7 MultiSeat t100 series clients connected directly to the host station + host (no microphone/no audio) • 10 sessions: 9 MultiSeat t100 series clients connected directly to the host station + host (no microphone/no audio) ⎯ 1 powered USB 2.0 hub connected to the host station w/USB mouse/keyboard 3