HP vc4725 Hardware Reference Guide: HP Compaq vc4725 Thin Client - Page 13

Hardware upgrades Removing and replacing the chassis cover To install internal hardware, you must remove the chassis cover as shown in the following procedures. WARNING: Before removing the chassis cover, ensure that the thin ! client is turned off and the power cord is disconnected from the electrical outlet. 1. Remove the two screws that secure the cover to the chassis 1 2. Slide the cover about 1/2-inch toward the back of the unit, then lift the cover off the chassis 2 1 2 V V Removing the chassis cover To replace the chassis cover, reverse the previous procedure. Hardware Reference Guide www.hp.com 2-3