HP xp8000 HP xp8000 series digital projector - RS232 Protocol Reference - Page 15

RS-232 keyword listing (continued) Keyword Parameters Description IPAD ? Queries the IP addresses associated with the connectivity module. The notification takes this form: *IPAD=IP_addr_1, IP_addr_2 where: • IP_addr_1 = the IP address of the module's LAN connector. • IP_addr_2 (if present) = the IP address of a wireless network card connected to the connectivity module. For example: *IPAD=15.7.123.54, 15.7.123.55 SNUM ? Queries the projector's serial number. Power and status functions SHDN None Puts the projector into cool-down state, and later into standby state. The projector sends a notification when it enters cool-down state (STAT=3), and another when it enters standby state (STAT=0). Note: This keyword requires the projector to be in its on state (STAT=1). Note: Do not send any requests other than STAT in the time between the cool-down and standby state notifications. Otherwise, unexpected results can occur. W None Puts the projector into warm-up state, and later into on state. The projector sends a notification when it enters warm-up state (STAT=2), and another when it enters the on state (STAT=1). Note: This keyword requires the projector to be in standby state (STAT=0). Note: Do not send any requests other than STAT in the time between the warm-up and on state notifications. Otherwise, unexpected results can occur. RS-232 protocol reference 15