HP xp8020 HP xp8000 series digital projector - (English) Reference Guide - Page 35
To set up network access, setup > Network
View all HP xp8020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installation and Setup To set up network access 1. Plug a CAT5 network cable into the RJ-45 network port on the back of the projector. If the projector has power, the left indicator light on the network port turns on showing a 10- or 100-Mb/s connection. The light on the right shows network activity. The projector normally attempts to get an IP address from a Dynamic Host Configuration Protocol (DCHP) server, or, if a server is not available, it takes a default address. The IP address is displayed at the bottom of the on-screen menu. 2. If you want to view or change the projector's TCP/IP network configuration, turn on the projector, open the on-screen menu, select setup > Network, and enter changes. If you are not running on a DHCP server, talk to your network administrator to find the correct TCP/IP network settings. To set the advanced network configuration, see "To set basic projector properties" on page 54. Reference Guide 35