Hikvision DS-1200KI User Manual - Page 22

Keyboard Operation

Page 22 highlights

DS-1200KI/1006KI Keyboard  User Manual Keyboard Operation This section describes how to control devices using the keyboard. On the keyboard, Press the MODE button on the panel to enter the operation for different devices. DS-1200KI keyboards support the following eight operation modes, while DS-1006KI keyboards support mode 4, 5, and 6. 1.Keyboard 2.MAG by IP 3.DVR by IP 4.MAG by RS-422 5.DVR by RS-485 6.To Analog Dev 7.iVMS Platform 8.Private VMS See the following table for the description of each keyboard mode. Description of Keyboard Mode SN Operation Mode Description 1 Keyboard The keyboard can be used for managing the devices (including the IPC, IP dome, DVR/NVR, MVC, decoder, video wall controller, etc.) for control. The keyboard can add the devices via Web browser and assign each of them the unique device ID, and finally manage to communicate with and realize the video wall or PTZ control through the device ID+command operation. 2 MAG by IP The keyboard can connect with the matrix access gateway, and realize the video wall control, PTZ control, etc. 3 DVR by IP The keyboard can connect with the DVR/NVR and remotely call the device menu and realize PTZ control through the virtual panel. 4 The keyboard can connect with the matrix access gateway via RS- MAG by RS-422 422 serial port, and realize the video wall control, PTZ control, etc. 5 The keyboard can connect with the DVR/NVR via RS-485 serial DVR by RS-485 port, and remotely call the device menu and realize PTZ control through the virtual panel. 6 To Analog Dev The keyboard can connect with the analog dome or PTZ unit via RS-485 serial port, and realize PTZ control; or connect to analog 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

DS-1200KI/1006KI Keyboard
User Manual
15
Keyboard Operation
This section describes how to control devices using the keyboard.
On the keyboard, Press the MODE button on the panel to enter the operation for different devices.
DS
-
1200KI keyboards support the following eight operation modes, while DS
-
1006KI keyboards
support mode 4, 5, and 6.
See the following table for the description of each keyboard mode.
Description of Keyboard Mode
SN
Operation Mode
Description
1
Keyboard
The keyboard can be used for managing the devices (including
the IPC, IP dome, DVR/NVR, MVC, decoder, video wall controller,
etc.) for control. The keyboard can add the devices via Web
browser and assign each of them the unique device ID, and finally
manage to communicate with and realize the video wall or PTZ
control through the
device ID
+
command
operation.
2
MAG by IP
The keyboard can connect with the matrix access gateway, and
realize the
video wall control, PTZ control, etc.
3
DVR by IP
The keyboard can connect with the DVR/NVR and remotely call
the device menu and realize PTZ control through the virtual
panel.
4
MAG by RS-422
The keyboard can connect with the matrix access gateway via RS-
422 serial port, and realize the video wall control, PTZ control,
etc.
5
DVR by RS-485
The keyboard can connect with the DVR/NVR via RS-485 serial
port,
and remotely call the device menu and realize PTZ control
through the virtual panel.
6
To Analog Dev
The keyboard can connect with the analog dome or PTZ unit via
RS-485 serial port, and realize PTZ control; or connect to analog
1.Keyboard
2.MAG by IP
3.DVR by IP
4.MAG by RS-422
5.DVR by RS-485
6.To Analog Dev
7.iVMS Platform
8.Private VMS