Hikvision DS-1200KI User Manual - Page 29

DVR by RS-485

Get Hikvision DS-1200KI PDF manuals and user guides View all Hikvision DS-1200KI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

DS-1200KI/1006KI Keyboard  User Manual  You can also press the Num + CAM buttons to select the input channel, and operate the PTZ control.  For the initial use of MAG, you must use the configuration kits software to configure the input/output channel ID of the MAG. Please see the related user manual for details. The input/output channel ID is used for switching on the video wall or PTZ control during keyboard operation. DVR by RS-485 In DVR by RS-485 mode, the keyboard screen will display a prompt message asking you to confirm your device version. If your NVR is of a 4.1.50 or later version, select Yes; otherwise, select No. If your DVR is of a 3.5.35 or later version, select Yes; otherwise, select No. Please note that selecting an incorrect device version may result in function unavailability. If you encounter a camera control problem, try to change the device ID of your NVR or DVR to a digit from 1 to 16. The keyboard can connect with the DVR/NVR via RS-485 serial port, and remotely call the device menu and realize PTZ control through the virtual panel. Before you start: Check the connection between the DVR/NVR and the Keyboard. Connect the T+ ad T- terminals of the keyboard's RS-485 serial port with the KB port on the DVR/NVR rear panel respectively. Our keyboard products support DVR/NVR with KB ports only. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
DS-1200KI/1006KI Keyboard
User Manual
22
You can also press the
Num
+ CAM buttons to select the input channel, and operate the PTZ
control.
For the initial use of MAG, you must use the configuration kits software to configure the
input/output channel ID of the MAG. Please see the related user manual for details. The
input/output channel ID is used for switching on the video wall or PTZ control during keyboard
operation.
DVR by RS-485
In DVR by RS
-
485 mode, the keyboard screen will display a prompt message asking you to confirm
your device version. If your NVR is of a 4.1.50 or later version, select
Yes
; otherwise, select
No
. If
your DVR is of a 3.5.35 or later version, select
Yes
; otherwise, select
No
. Please note that selecting
an incorrect device version may result in function unavailability.
If you encounter a camera control problem, try to change the device ID of your NVR or DVR to a
digit from 1 to 16.
The keyboard can connect with the DVR/NVR via RS
-
485 serial port, and remotely call the device
menu and realize PTZ control through the virtual panel.
Before you start:
Check the connection between the DVR/NVR and the Keyboard. Connect the
T+
ad
T
-
terminals of
the keyboard's RS
-
485 serial port with the KB port on the DVR/NVR rear panel respectively.
Our keyboard products support DVR/NVR with KB ports only.