Hitachi 32HDT20 Owners Guide - Page 61
Notes
View all Hitachi 32HDT20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
SETUP Video 2 Auto Link Use this function to automatically turn the TV on and tune to Video 2 when it detects a video signal to input 2. Setup Set The Inputs Video 1 Rename Video 2 Rename Video 2 Auto Link Video 3 Rename Video 4 Rename Video 5 Rename Video Power Save Move SEL Select THUMB STICK SELECT THUMB STICK Setup Set The Inputs Video 2 Auto Link Auto Input Signal Sensor Remote Control Sensor Off Move SEL Return Setup Set The Inputs Video 2 Auto Link Auto Input Signal Sensor Remote Control Sensor Off Move SEL Select Use THUMB STICK ̆ or ̄, then press down on THUMB STICK to change AUTO LINK setting. When AUTO INPUT SIGNAL SENSOR is selected, the TV will turn on and switch to Video2 automatically, when the Video2 input device is turned on. This is convenient when you want to watch a movie with your VCR, laserdisc player, or DVD player. When REMOTE CONTROL SENSOR is selected, the TV will turn on and switch to Video2 automatically when the Video2 input device is turned on (VCR, laserdisc, or DVD) and any of the buttons on your remote control is pressed. Select Off to disable this function. Press EXIT to quit the menu. NOTES: 1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described above. 2. When using REMOTE CONTROL SENSOR mode, any remote control button will substitute for your video input device play button. However, intended operation is for use with your VCR, laserdisc, or DVD play button. 3. If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after three hours. 61