Hitachi 32HDT20 Owners Guide - Page 74

RGB ON SCREEN DISPLAY RGB2 INPUT This feature allows you to select between Mode A and Mode B depending on signal input to RGB2 Input, depending on your preference. RGB MODE MENU SET UP AUTO ADJUST H POSITION V POSITION HORIZONTAL CLOCK CLOCK PHASE RESET RGB2 INPUT INPUT LEVEL MOVE CHANGE VALUE : : 0 : 0 : 0 : +22 : : ̇MODE:1 ̈ : 0.7V EXIT TO QUIT Use THUMB STICK ̇, ̈ to toggle between Mode 1 or Mode 2 signal input to RGB2 Input. NOTE: This feature is only available in RGB:2 input. See page 29 for signal type for Mode 1 and Mode 2 RGB1/RGB2 ASPECT DISPLAY MODE. RGB1 INPUT SIGNAL RGB2 INPUT SIGNAL MODE 1 MODE 2 PC VGA 480p 720p 1080i PC VGA 480p 720p 1080i PC VGA 480p 720p 1080i ASPECT REAL REAL REAL(1) X X REAL REAL REAL X X REAL X X X X MODE NORMAL NORMAL NORMAL(1) X X NORMAL NORMAL NORMAL X X NORMAL X X X X AVAILABILITY FULL FULL FULL (1) FULL (2) FULL (2) FULL FULL FULL (3) FULL (2) FULL (2) FULL FULL FULL (2) FULL (2) FULL (2) For numbers in ( ), please see corresponding note below. NOTES: 1. Lack of raster can be seen in RGB1 when a 480p signal is input. 2. AUTO ADJUST function (see page 72) is not available in 720p, 1080i, and (480p/VGA~RGB2 Mode 2 only) input signal. 3. Horizontal Phase is shifted in RGB2 when 480p signal is input. 4. All FULL aspect mode, only 95% of information can be displayed (5% is treated as overscan). INPUT LEVEL Select the Input Level voltage between 0.7V and 1.0V. RGB MODE MENU SET UP AUTO ADJUST H POSITION V POSITION HORIZONTAL CLOCK CLOCK PHASE RESET RGB2 INPUT INPUT LEVEL MOVE CHANGE VALUE : : 0 : 0 : 0 : +22 : : MODE:1 : ̇0.7V̈ EXIT TO QUIT Use THUMB STICK ̇, ̈ to select between 0.7V and 1.0V depending on the amount of brightness in the picture. 74