Hitachi 32HDT20 Owners Guide - Page 73

RGB ON SCREEN DISPLAY Adjusts the pixel clock frequency to reduce the vertical stripe. HORIZONTAL CLOCK RGB MODE MENU SET UP AUTO ADJUST H POSITION V POSITION HORIZONTAL CLOCK CLOCK PHASE RESET RGB2 INPUT INPUT LEVEL MOVE CHANGE VALUE : : 0 : 0 : ̇0̈ : +22 : : MODE:1 : 0.7V EXIT TO QUIT Use THUMB STICK ̇, ̈ to adjust the horizontal clock. Press the MENU button to return to previous menu. Press EXIT to quit. NOTE: Due to varying signal content, you may see vertical or horizontal lines bend occasionally in RGB mode. However, this phenomenon is not a defect. It's caused by a lack of picture content due to under-scanning in RGB mode. CLOCK PHASE Adjusts the phase to correct blurred or unstable images. RGB MODE MENU SET UP AUTO ADJUST H POSITION V POSITION HORIZONTAL CLOCK CLOCK PHASE RESET RGB2 INPUT INPUT LEVEL MOVE CHANGE VALUE : : 0 : 0 : 0 : ̇ +22 ̈ : : MODE:1 : 0.7V EXIT TO QUIT Use THUMB STICK ̇, ̈ to adjust the clock phase. Press the MENU button to return to previous menu item. Press EXIT to quit. RESET Set HORIZONTAL POSITION, VERTICAL POSITION, HORIZONTAL CLOCK and CLOCK PHASE to factory preset, for current RGB format. RGB MODE MENU SET UP AUTO ADJUST H POSITION V POSITION HORIZONTAL CLOCK CLOCK PHASE RESET RGB2 INPUT INPUT LEVEL MOVE SEL TO RESET : : 0 : 0 : 0 : +22 : : MODE:1 : 0.7V EXIT TO QUIT Press down on THUMB STICK to RESET to factory preset settings. 73