Hitachi 42HDX99 Owners Guide - Page 13
Only for HDX models - warranty
View all Hitachi 42HDX99 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
First time use Rear Panel Connections ቫ IEEE1394 (DV INPUT) (Only for HDX models) These jacks provide a digital interface for your external digital devices, such as a Digital VCR (DVHS), Set-Top-Box or Digital Camcorder by means of a single cable (see page 24). When using IEEE1394 connections, you enable video and audio digital data exchange between a compatible device. This connection also enables you to control basic equipment functions (such as VCR play, rewind, fast forward, stop, etc.) from your TV On-Screen Display. ቭ Upgrade Card This card slot is for future software upgrades. Hitachi will notify you if a software upgrade is required for your TV. In order to receive written notification, please complete and return your warranty card. ቮ To Power Swivel Connector Connects to the Power Swivel Table Top Stand. ቯ CableCARD Slot This slot is for the CableCARD that will be provided by your local cable operator to gain access to chosen cable channels. The CableCARD will allow you to tune digital and high definition cable channels. Please call your local cable operator if this service is available before requesting a CableCARD (also known as Point of Deployment (POD) module). 1. Connect a coaxial cable to cable terminal of the Rear Panel Jacks. 2. Insert the CableCARD into the slot (Top of card should be facing towards you as shown below). Digital Cable INSERT If the CableCARD is properly installed or removed, the TV will display the following respective screens. CableCARD is installed OR CableCARD is not installed After the CableCARD is installed, wait until the second screen below appears. Acquiring Data. Please wait. In order to start cable service for this device, please contact your cable provider CableCARD(tm): 123-456-789-1 Host: 123-456-789-1 Data: 123-456-789-1 Unit Address: 123-456-789-1 Press EXIT to return NOTE: 1. A digital cable subscription is required. 2. Do not insert a PCMCIA card into the CableCARD slot. Please take note of all information on the screen (you will provide this information to your cable operator). Call your cable operator and give them the information from the card to start your cable service. 13