Hitachi C10RA3 Instruction Manual - Page 7

English ACCESSORIES AND ATTACHMENTS RECOMMENDED ACCESSORIES WARNING Visit your Hardware Department or see the Power and Hand Tools Catalog to purchase recommended accessories for this power tool. WARNING To avoid the risk of personal injury: • Do not use a dado with a diameter larger than 6". • Maximum dado width is 1/2". DO NOT USE WIDER COMBINATIONS. • Do not use molding head set with this saw. • Do not modify this power tool or use accessories not recommended by Store. TOOLS NEEDED FOR ASSEMBLY Supplied Not Supplied Wrench Wrench 3 mm Hex Wrench Medium Screwdriver #2 Phillips screwdriver Straight Edge Adjustable Wrench Combination Square CARTON CONTENTS UNPACKING AND CHECKING CONTENTS Separate all parts from packing materials. Check each part with the illustration on the next page and the "Table of Loose Parts" to make certain all items are accounted for, before discarding any packing material. TABLE OF LOOSE PARTS ITEM DESCRIPTION QUANTITY A Table saw assembly 1 B Blade guard and splitter 1 C Rip fence 1 D Dado table insert 1 E Miter gauge 1 F Blade wrench 2 G Hand wheel 2 H Blade 1 I Hex wrench 1 J Guard mounting bolt,flat washer, 1 each toothed washer,spring washer K Dome nut 2 WARNING If any part is missing or damaged, do not attempt to assemble the table saw, plug in the power cord, or turn the switch ON until the missing or damaged part is obtained and is installed correctly. STAND ITEM DESCRIPTION L Stand assembly QUANTITY 1 NOTE: To make assembly easier, keep contents of box together. Apply a coat of automobile wax to the table. Wipe all parts thoroughly with a clean dry cloth. This will reduce friction when pushing the workpiece. - 7 -