Hitachi CMP420V1 Owners Guide - Page 37

OPERATING INSTRUCTIONS ENGLISH INPUT SELECT button SIZE button Input Switching Input can be switched by pressing the AV1, AV2, AV3, AV4, RGB1 or RGB2 buttons of the remote control. Input can be switched in the sequence of AV1 AV2 AV3 AV4 RGB1 RGB2 by pressing the INPUT SELECT button of the monitor. Size Switching Each time the SIZE button of the remote control or the monitor is pressed, the screen display size will change in sequence and the status will be displayed at the bottom of the screen. • During VIDEO signal input (AV1, AV2, AV3, AV4, RGB1 (set to [DVI-STB]) and RGB2 (set to [Component])) 4:3 Panoramic Zoom Full Cinema • The size will fix as Full mode and not change when receiving the component signal of 1080i/50, 1080i/60 or 720p/60. RGB/VIDEO buttons VOL RGB 1 RGB 2 MUTE VOL AV1 AV2 AV3 AV4 AUTO PinP SIZE RECALL MENU OK AV1 RGB2 AV2 AV3 RGB1 AV4 SIZE button Full Display size selection diagram When you want to Set the display size Input signal Play a 4:3 image in a 16:9 screen faithfully. 43 Play a 4:3 image in a 16:9 screen with the height and width of the middle of the screen enlarged on equal scales and with both sides appearing somewhat enlarged. Play a 16:9 VISTA size image in the 4:3 image faithfully reproduced on the 16:9 screen. Play a 21:9 Cinema size image in the 4:3 image expanded vertically on the 16:9 screen. Play a 4:3 image faithfully in a 16:9 screen in the standard vertical size and horizontally squeezed.* Panoramic Zoom Cinema Full (4:3 signal) (Vista) (Cinema) (Squeeze) Display screen Remarks Blanking occurs on both sides. • The 4:3 image is called a letterbox image. • In some cases, some slight blanking may remain at the top and bottom. In some cases, some slight blanking may remain at the top and bottom. * An image with an aspect ratio of 16:9 shrunk horizontally to 4:3 to display in a 4:3 screen