Hitachi CP-A200 User Manual - Page 34
INPUT menu continued
![]() |
View all Hitachi CP-A200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
INPUT menu INPUT menu (continued) Item Description VIDEO FORMAT The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ◄/► buttons to select the input port. (2) Using the ▲/▼ buttons switches the mode for video format. AUTO ó NTSC ó PAL ó SECAM N-PAL ó M-PAL ó NTSC4.43 • This item is performed only for a video signal from VIDEO port or S-VIDEO port. • The AUTO mode automatically selects the optimum mode. • The AUTO operation may not work well for some signals. If the picture becomes unstable (e.g. an irregular picture, lack of color), please select the mode according to the input signal. FRAME LOCK Set the frame lock function on/off for each port. (1) U sing the ▲/▼ buttons to select one of following ports. COMPUTER (IN)1 ó COMPUTER (IN)2 (2) U sing the ◄/► buttons to turns the frame lock function on/off. TURN ON ó TURN OFF • This item can be performed only on a signal with a vertical frequency of 50 to 60 Hz. • When the TURN ON is selected, a moving pictures are displayed more smoothly. • This function may cause a certain degradation of the picture. In such a case, please select TURN OFF. COMPUTER IN The computer input signal type for COMPUTER IN1 and IN2 ports can be set. (1) U se the ◄/► buttons to select the input port to be set. COMPUTER (IN)1 ó COMPUTER (IN)2 (2) U se the ▲/▼ buttons to select the computer input signal type. AUTO ó SYNC ON G OFF Selecting AUTO allows reception of sync on G signal. • When AUTO is selected, the picture may be distorted with certain input signals. In such a case, remove the signal connector first and select SYNC ON G OFF on the menu, and then reconnect the signal. Refer to "Technical" on how to input a component video signal to the COMPUTER IN1 or IN2 port. (continued on next page) 34
![](/manual_guide/products/hitachi-cpa200-user-manual-e798252/34.png)