Hitachi CP-A200 User Manual - Page 44
OPTION menu
View all Hitachi CP-A200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table. Item AUTO SEARCH Description Using the ▲/▼ buttons turns on/off the automatic signal search function. TURN ON TURN OFF When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order. The search is started from the current port. Then when an input is found, the projector will stop searching and display the image. COMPUTER IN1 COMPUTER IN2 VIDEO S-VIDEO COMPONENT DIRECT POWER ON Using the ▲/▼ buttons turns on/off the DIRECT POWER ON function. TURN ON TURN OFF When set to the TURN ON, the lamp in projector will be automatically turned on without the usual procedure (16), only when the projector is supplied with the power after the power was cut while the lamp was on. • This function does not work as long as the power has been supplied to the projector while the lamp is off. • After turning the lamp on by the DIRECT POWER ON function, if neither input nor operation is detected for about 30 minutes, the projector is turned off, even though the AUTO POWER OFF function (45) is disabled. (continued on next page) 44