Hitachi CP-A200 User Manual - Page 38

SETUP menu SETUP menu (continued) Item STANDBY MODE MONITOR OUT Description Using ▲/▼ buttons switches the standby mode setting between NORMAL and SAVING. NORMAL ó SAVING When SAVING is selected, the power consumption in the standby mode is lowered with some functional restriction as below: • When SAVING is selected, the communication control (RS-232C) is disabled except to turn the projector on while the projector is in the standby mode. • When SAVING is selected, AUDIO OUT STANDBY setting of AUDIO (39) is invalid, and no signal is output from AUDIO OUT ports in the standby mode. The combination of a picture shown on screen and output from the MONITOR OUT port can be arranged in the menu. The picture coming into the port selected in the (2) is output to the MONITOR OUT port while an image from the port chosen in the (1) is on screen. (1) Choose a picture input port using ▲/▼ buttons. QUIT ó COMPUTER(IN)1 ó COMPUTER(IN)2  STANDBY  VIDEO ó S-VIDEO ó COMPONENT (Y, Cb/Pb, Cr/Pr) • Choose STANDBY, to select the output signal from the MONITOR OUT port in the standby mode. • While QUIT is selected, pressing the ◄ button returns to the previous menu. (2) Select one of the COMPUTER IN ports using ◄/► buttons. Choosing the COMPUTER 1 allows the following choice. 1 (COMPUTER IN1) ó OFF Choosing the COMPUTER 2 allows the following choice. 2 (COMPUTER IN2) ó OFF Choosing other input or STANDBY allows the following choice. 1 (COMPUTER IN1) ó 2 (COMPUTER IN2) ó OFF • OFF disables the MONITOR OUT port. 38