Hitachi CP X206 Network Guide - Page 17

3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.4 Port Settings Displays and configures communication port settings. Item Description Network Control Port1 (Port:23) Configures command control port 1 (Port:23). Port open Click [Enable] check box to use port 23. Authentication Click [Enable] check box when authentication is required for this port. Network Control Port2 (Port:9715) Configures command control port 2 (Port:9715). Port open Click [Enable] check box to use port 9715. Authentication Click [Enable] check box when authentication is required for this port. Image Transfer Port (Port:9716) Configures the image transfer port (Port:9716). Port open Click the [Enable] check box to use port 9716. Authentication Click the [Enable] check box when authentication is required for this port. SNMP Port Configures the SNMP port. Port open Click [Enable] check box to use SNMP. Trap address Configures the destination of the SNMP Trap in IP format. • The address allows not only IP address but also domain name if the valid DNS server is setup in the Network Settings. The maximum length of host or domain name is up to 255 characters. SMTP Port Configures the SMTP port. Port open Click [Enable] check box to use the e-mail function. Click [Apply] button to save the settings. NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu. 17