Hitachi CP X206 Network Guide - Page 24
Description, Time difference, SNTP Server IP, Address, Network, Settings, Cycle, hour : minute
![]() |
UPC - 050585151451
View all Hitachi CP X206 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) Item Time difference SNTP SNTP Server IP Address Cycle Description Configures the time difference. Set the same time difference as the one set on your PC. If unsure, consult your IT manager. Click the [ON] check box to retrieve Date and Time information from the SNTP server and set the following items. Configures the SNTP server address in IP format. • The address allows not only IP address but also domain name if the valid DNS server is setup in the Network Settings. The maximum length of host or domain name is up to 255 characters. Configures the interval at which to retrieve Date and Time information from the SNTP server (hour : minute). Click [Apply] button to save the settings. NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. • To enable the SNTP function, the time difference must be set. • The projector will retrieve Date and Time information from the time server and override time settings when SNTP is enabled. • The internal clock's time may not remain accurate. Using SNTP is recommended to maintain accurate time. 24
![](/manual_guide/products/hitachi-cp-x206-network-guide-f502901/24.png)