Hitachi CP X206 Network Guide - Page 32
E-mail Alerts
![]() |
UPC - 050585151451
View all Hitachi CP X206 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
3. Management with Web browser software 3.2 E-mail Alerts The projector can automatically send an alert message to the specified e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error. NOTE • Up to five e-mail addresses can be specified. • The projector may be not able to send e-mail if the projector suddenly loses power. Mail Settings (18) To use the projector's e-mail alert function, please configure the following items through a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter the Administrator ID and password and click [Logon]. 3) Click [Port Settings] on the main menu. 4) Click [Enable] check box to open the SMTP Port. 5) Click [Apply] button to save the settings. NOTE • A Network Restart is required after the SMTP Port configuration settings have changed. Click [Network Restart] and configure the following items. 6) Click [Mail Settings] and configure each item. Refer to the item 3.1.5 Mail Settings (18) for further information. 7) Click [Apply] button to save the settings. NOTE • Click [Send Test Mail] button in [Mail Settings] to confirm that the e-mail settings are correct. The following mail will be delivered to the specified addresses. Subject line :Test Mail Text :Send Test Mail Date Time IP Address MAC Address 32
![](/manual_guide/products/hitachi-cp-x206-network-guide-f502901/32.png)