Hitachi D10VF Handling Instructions - Page 3

DRILL SAFETY WARNINGS 1. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. 2. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. 3. Do not wear gloves made of stuff liable to roll up such as cotton, wool, cloth or string, etc. 4. Prior to drilling into walls, ceilings or floors, ensure there are no electric cables or conduits inside. SPECIFICATIONS Model Voltage (by areas)* Power input No load speed Drill chuck capacity Steel Twist Bit Hole Saw Capacity Flat Spade Bit Wood Auger Bit Hole Saw Weight (without cord) Spec. for keyed chuck Spec. for keyless chuck D10VF D10VG D13VF D13VG (110V, 115V, 120V, 127V, 220V, 230V, 240V) 710W* 0-3,000/min 0-1,200/min 0-850/min 0-600/min 10 mm 13 mm 10 mm 10 mm 13 mm 13 mm - 38 mm 51 mm 70 mm 25 mm 32 mm 40 mm 40 mm - - 32 mm 38 mm 29 mm 70 mm 102 mm 114 mm 1.8 kg 1.8 kg 1.9 kg 1.9 kg 2.1 kg 2.0 kg 2.1 kg 2.0 kg *Be sure to check the nameplate on product as it is subject to change by areas. Model Speed of angle unit Steel Capacity Wood Twist Bit Hole Saw Flat Spade Bit Auger Bit Hole Saw D13VF D13VG LOW(650/min) HIGH(1350/min) LOW(400/min) HIGH(900/min) 13 mm 13 mm 13 mm 13 mm 64 mm 32 mm 70 mm 51 mm 40 mm 32 mm 40 mm 40 mm 38 mm 29 mm 38 mm 32 mm 114 mm 64 mm 114 mm 102 mm STANDARD ACCESSORIES (1) Chuck wrench (Spec. only for keyed chuck) ...... 1 (1) Side handle 1 (2)Chuck wrench (Spec. only for keyed chuck) ........ 1 (1) Side handle 1 (2) Handle joint 1 (3) Chuck wrench (Spec. only for keyed chuck) ...... 1 Standard accessories are subject to change without notice. OPTIONAL ACCESSORIES (sold separately) (1) Side handle 1 (2) Hook (A 1 (1) Hook (A 1 (1) Hook (A 1 (2) Angle attachment 1 Optional accessories are subject to change without notice. APPLICATIONS ⅜ Boring holes in metal, wood, and plastic. 3