Hitachi DH30PC2 Instruction Manual - Page 11
Confirming condition of the environment, Mounting the drill bit, Installation of dust cup Optional, - sds plus
UPC - 717709011113
View all Hitachi DH30PC2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English 5. Confirming condition of the environment: Confirm that the work site is placed under appropriate conditions conforming to prescribed precautions. 6. Mounting the drill bit (Fig. 2) CAUTION: Part of SDS-plus shank Front cap To prevent accidents, make sure to turn the switch off and disconnect the plug from the receptacle. NOTE: When using tools such as bull points, drill bits, etc., make sure to use the Drill bit Grip genuine parts designated by our company. (1) Clean the shank portion of the drill bit. (2) To attach a drill bit (SDS-plus shank), Fig. 2 fully pull the grip in the direction of the arrow as shown in Fig. 2 and insert the drill bit as far as it will go while manu- ally turning. (3) By releasing the grip, the drill bit will be secured. (4) To remove the drill bit, fully pull the grip in the direction of the arrow and pull out the drill bit. 7. Installation of dust cup (Optional accessories) (Fig. 3) Dust cup When using a rotary hammer for up- ward drilling operations attach a dust cup to collect dust or particles for easy operation. Installing the dust cup Use the dust cup by attaching to the drill bit a shown in Fig. 3. When using a bit which has big diameter, enlarge the center hole of the Fig. 3 dust cup with this rotary hammer. CAUTION: The dust cup is for exclusive use of concrete drilling work. Do not use them for wood or metal drilling work. Dump particles after every two or three holes when drilling. 11