Hitachi DZ-MV200A Owners Guide - Page 40
Basic Techniques
View all Hitachi DZ-MV200A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Basic Techniques This section explains about recording of movies and still images, and also basic settings on DVD video camera/recorder. Basic Handling of DVD video camera/recorder Turning DVD Video Camera/Recorder On While holding down the red button at the center of power switch, turn the switch to set it to " VIDEO" or " PHOTO". Note: When power is turned on, the self-diagnosis function of DVD video camera/recorder may work, and some message may appear. If any message appears, refer to "Trouble Messages" (p. 99). Power switch Opening LCD Monitor If you open the LCD monitor, you can monitor subject image on the LCD screen. If the monitor is open, the viewfinder will be off. P ress the OPEN button to open the LCD monitor. The LCD monitor can be opened up to approximately 90°. If the LCD monitor is open 90°, it can be tilted with screen down as much as 90°, and can also be tilted with screen up and turned up to 180° so the screen faces in the same direction as the lens. Tilt the LCD monitor to adjust its vertical angle so that you can see the screen easily. 90° 90° OPEN button Note: Be sure to open the LCD monitor appor ximately 90° before changing its vertical angle. Note: Do not record for a prolonged time with the LCD monitor turned approximately 180 ° in close contact with the DVD video camera/recorder body: Doing this could cause the DVD video camera/recorder and LCD monitor to become hot. 180° 90° English 40