Hitachi FXTRIO-77 User Guide - Page 37

StarBoard FX-TRIO Series 2.3 Start Method 2.3.1 Start Method (1) Connect the devices with reference to the connection method on page 1-15. How to use (2) Turn on the power switch of the projector. (3) Turn on the power switch of the PC to start Windows. (4) Adjust the position of the projector so that the Windows screen projected by the projector is within the input area (refer to page 1-5 of this User's Guide). (5) Start the StarBoard Software. (StarBoard Software does not start when Windows starts unless [Startup] is selected in the shortcut creation step during the software installation process. In this case, start the StarBoard Software manually.) Starting the StarBoard Software manually Select [Start] → [Programmes] → [StarBoard Software] → [ StarBoard Software], or double click the StarBoard Software icon on the desktop. (A StarBoard Software icon will not be created on the desktop unless [Desktop] is selected in the If the "No connection" icon in below appears on the Tasktray, it means that the StarBoard is not connected. Make sure that the StarBoard and the PC are properly connected. Connected No Connection If the StarBoard is properly connected, the icon changes to "Connected" as above. If the icon does not change despite correcting the connection, there may be some other problem. For details, refer to "3. Appendix 3.1 Troubleshooting" on page 3-1 of this User's Guide. If the cursor location deviates from the pen tip, perform calibration. In the StarBoard Software Main Menu, select "Settings" → "Calibration" → "OK". (Or "StarBoard" → "Settings" → "StarBoard" → "Calibration", when using Toolbar Mode.) 2-7 English