Hitachi LE46S704 Owners Guide - Page 8
Wall Mounting Setup - specifications
View all Hitachi LE46S704 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
How To Install Your New Hitachi LCD Television WALL MOUNTING SETUP STEP (1) : REMOVE THE STAND BASE FROM THE LCD TELEVISION In order to remove the stand from the TV safely, please put the TV set on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage; then remove the screws as shown below to separate the Table Top Stand from the TV. Now the Stand can be separated from the TV. Useful dimensions for the WALL MOUNT assembly are illustrated on page 46 and 47. LE42S704 LE46S704 3 Screws M4 2 Screws T4 STEP (2) : INSTALL THE WALL MOUNT BRACKETS ON THE LCD TELEVISION USING 4 SCREWS. Screw mounting holes (4 locations) for use with a wall mount bracket. DO NOT reuse the original screws that were in these screw mounting holes or the screws removed in STEP(1) above, as such screws are not long enough to properly secure the TV to the wall bracket. Please refer to example at right and caution below to determine proper screw length. Wall Mount Brackets Screw Length (A) Insertion Length (B) Spring Washer (C) Plane Washer (D) Wall Mount Bracket (E) LE42S704 Example : A = B+C+D+E A: 13.5~15.5 mm. B: 8.5~10.5 mm. C: 1 mm. D: 1 mm. E: 3 mm. LE46S704 Example : A = B+C+D+E A: 14.5~16.5 mm. B: 9.5~11.5 mm. C: 1 mm. D: 1 mm. E: 3 mm. For Wall Mount assembly, please refer to the Installation Manual of the Wall Mount Unit. The screw type :Thread ISO M6 (Metric type, do not use Standard type). CAUTION Insertion length (B) of the screws must be (i) within 8.5~10.5 mm for LE42S704, or (ii) within 9.5~11.5 mm for LE46S704. If the length is less than specifed, the TV's weight cannot be maintained. If the length is more than specified, a space is created between the Wall Mount Bracket and the LCD Television.This insertion length is very important. STEP (3) : TIPS TO CONSIDER FOR THE LOCATION OF THE LCD TELEVISION. More than 10 cm (4"). More than 30 cm (1'). Keep more than 2 cm (0.8") away from the wall. •• Do not block the ventilation holes. In addition CAUTION please keep a certain distance around the TV and make sure not to obstruct ventilation. Blocking the ventilation holes may cause fire or defect. •• If you purchased a Wall Mount bracket, please ask for a professional installation. Do not install by yourself. •• This LCD unit features an advanced ventilation system configured for vertical installation. A knowledgeable and experienced professional technician can perform other mounting or installation orientations (e.g., horizontal, tilted) provided that you specifically inform the technician of the unit's specialized ventilation needs. Call 800.HITACHI for additional info and guidance. Although this LCD Display Panel can be installed using a variety of third party wall mounting brackets/devices, CAUTION such third party brackets/devices have not been tested or approved by Hitachi for use or compatibility with this LCD Display Panel. Accordingly, Hitachi accepts no responsibility or liability for any injuries or property damage resulting from the use of such third party brackets/devices. Hitachi strongly advises that any installation of this LCD Display Panel using wall mounting brackets/devices be performed only by a qualified and experienced television installation technician who has completed a thorough evaluation of: a) the weight-bearing strength and stability of the intended wall mount surface; and b) the weight-bearing strength and compatibility of the intended wall mount brackets/device. 8