Hitachi NV45AE Instruction Manual - Page 16
Using The Shingle Guide, Adjusting The Nailing Depth
UPC - 717709012868
View all Hitachi NV45AE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English USING THE SHINGLE GUIDE The shingle guide can be used to control shingle spacing. Adjust the shingle guide in the following order. 1 DISCONNECT AIR HOSE FROM NAILER 2 Loosen the hex. socket hd. bolt with the accessory Allen wrench. 3 Place the shingle guide against the bottom of the first row of shingles. 4 Adjust the distance between the outlet and the shingle guide to the proper shingle exposure by sliding the shingle guide. 5 Tighten the hex. socket hd. bolt. Second row Outlet First row Furthermore, turn the adjuster until it reaches a position where it gets fixed with a clock. Turn adjuster Too deep Flush 2 If nails are driven too shallow, turn the adjuster clockwise while pulling it downward. When the adjuster is released, it return upward. Furthermore, turn the adjuster until it reaches a position where it gets fixed with a clock. Turn adjuster Too shallow Flush Proper shingle 3 exposure 4 Shingle guide Hex. socket hd. bolt 1 Disconnect air hose NOTE: ⅷ The proper shingle exposure will depend on the type of shingle and the manufacturer's specifications. ⅷ The shingle guide is not to be utilized as an indicator of nail location. ADJUSTING THE NAILING DEPTH To assure that each nail penetrates to the same depth, be sure that: 1) the air pressure to the Nailer remains constant (regulator is installed and working properly), and 2) the Nailer is always held firmly against the workpiece. If nails are driven too deep or shallow into the workpiece, adjust the nailing in the following order. 1 DISCONNECT AIR HOSE FROM NAILER 2 The adjuster can be fiexed each at 1/4 rotation. The adjuster moves approximately 0.25mm per 1/4 rotation. 3 Stop turning the adjuster when a suitable position is reached for a nailing test. 4 Connect the air hose. ALWAYS WEAR EYE PROTECTION. Perform a nailing test. 5 DISCONNECT AIR HOSE FROM NAILER. 6 Choose a suitable position for the adjuster. Adjuster 15 Disconnect air hose 2 If nails are driven too deep, turn the adjuster counterclockwise while pulling it downward. When the adjuster is released, it returns upward. - 16 -