Hitachi SB10Y1 Instruction Manual - Page 11
Operation
![]() |
View all Hitachi SB10Y1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ATTACH DUST COLLECTION BAG (Fig. D) 1. Place clamp (1) over bag sleeve (2). 2. Slide sleeve with clamp over the dust port. 3. Secure in position by tightening clamp handle. Do not force handle. Rotate the handle to increase the clamp size. Fig. D 1 2 OPERATION BASIC SANDER OPERATIONS ON/OFF Switch (Fig. E) The keyed switch is intended to prevent unauthorized use of the sander. 1. To turn the sander ON (I) insert the yellow key (1) into the key slot in the center of the switch. 2. Push the key firmly into the slot, then push switch to the ON (I) position to start the sander. 3. To turn the sander OFF (O) push the switch to the down position. 4. Remove the yellow switch key, when the sander has come to a complete stop, by gently pulling it outward. WARNING Remove the switch key whenever the sander is not in use. Place it in a safe place and out of reach of children. WARNING ALWAYS lock the switch OFF when the sander is not in use. Remove the key and keep it in a safe place. In the event of power failure, blown fuse, or tripped circuit breaker, turn the switch OFF and remove the key, preventing accidental startup when power comes on. Fig. E English 1 - 11 -
![](/manual_guide/products/hitachi-sb10y1-instruction-manual-6315f1e/11.png)