Hitachi SB10Y1 Instruction Manual - Page 3
Product Specifications - tools
View all Hitachi SB10Y1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
English WARNING Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints • Crystalline silica from bricks, cement and other masonry products • Arsenic and chromium from chemically treated lumber Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment such as dust masks that are specially designed to filter out microscopic particles. PRODUCT SPECIFICATIONS MOTOR Power Source 120 V, AC, 60 Hz, 5.5 AMPS Belt Speed 1850 FPM (Feet Per Minute) Disc speed 3000 RPM Horsepower 1/3 HP (Continuous Duty) TABLE Size 6 x 9″ Tilt 0 - 45° DUST COLLECTION Yes BELT AND DISC Belt size 4″ x 36″ Disc size 8″ dia. NET WEIGHT 50 LB (22.5 kg) NOTE: This tool is approved for sanding wood and wood products only. WARNING To avoid electrical hazards, fire hazards, or damage to the tool, use proper circuit protection. Use a separate electrical circuit for your tools. Your Sander is wired at the factory for 120V operation. Connect to a 120V, 15 AMP branch circuit and use a 15 Amp time delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is worn, cut or damaged in any way. -3-