Hitachi ic35l060avv207-0 Specifications - Page 194
When B=1, MAX LBA/CYL which is set by Set Max LBA/CYL command is pre
![]() |
View all Hitachi ic35l060avv207-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
After a successful command completion, Identify Device response words (61:60) shall reflect the maximum address set with this command. If the 48-bit Address feature set is supported, the value placed in Identify Device response words (103:100) shall be the same as the value placed in words (61:60). However, if the device contains greater than 268,435,455 sectors, the capacity addressable with 28-bit commands, and the address requested is 268,435,455, the max address shall be changed to the native maximum address, the value placed in words (61:60) shall be 268,435,455 and the value placed in words (103:100) shall be the native maximum address. If a host protected area has been established by a Set Max Address Ext command, the device shall return command aborted. Output parameters to the device B Option bit for selection whether nonvolatile or volatile. B = 0 is volatile condition. When B=1, MAX LBA/CYL which is set by Set Max LBA/CYL command is pre- served by POR. When B=0, MAX LBA/CYL which is set by Set Max LBA/CYL command will be lost by POR. B = 1 is not valid when the device is in Address Offset mode. Sector Number In LBA mode this register contains LBA bits 0 - 7 which is to be set. (L=1) In CHS mode this register is ignored. (L=0) Cylinder High/Low In LBA mode this register contains LBA bits 8 - 15 (Low), 16 - 23 (High) which is to be set. (L=1) In CHS mode this register contains cylinder number which is to be set. (L=0) H In LBA mode this register contains LBA bits 24 - 27 which is to be set. (L=1) In CHS mode this register is ignored. (L=0) Input parameters from the device Sector Number In LBA mode this register contains max LBA bits 0 - 7 which is set. (L=1) In CHS mode this register contains max sector number. (L=0) Cylinder High/Low In LBA mode this register contains max LBA bits 8 - 15 (Low), 16 - 23 (High) which is set. (L=1) In CHS mode this register contains max cylinder number which is set. (L=0) H In LBA mode this register contains max LBA bits 24 - 27 which is set. (L=1) In CHS mode this register contains max head number. (L=0) Deskstar 180GXP hard disk drive specifications 180
![](/manual_guide/products/hitachi-ic35l060avv2070-specifications-fd01c6a/194.png)