Hitachi ic35l060avv207-0 Specifications - Page 57
Capacity clip to 2GB/32GB - deskstar jumper settings
View all Hitachi ic35l060avv207-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
6.3.4.3 Capacity clip to 2GB/32GB The figure below shows the jumper positions used to select Device 0, Device 1, Cable Selection, or Device 1 (Slave) Present while setting the drive capacity down either to 2 GB or 32 GB for the purpose of compatibility. I GECA HFDB DEVICE 0 (Master) I GECA HF DB DEVICE 1 (Slave) IGECA HFDB CABLE SEL I GECA HFDB DEVICE 1 (Slave) Present Figure 49. Jumper positions for capacity clip to 2GB/32GB Notes: For the 30-GB model (factory default capacities less than 32GB): The jumper setting acts as a 2GB clip which clips the CHS to 4096/16/63. The LBA is unchanged from the factory default setting (dependent on the particular model). For all other models (factory default capacities greater than 32GB): The jumper setting acts as a 32GB clip which clips the LBA to 66055248. The CHS is unchanged from the factory default of 16383/16/63. Deskstar 180GXP hard disk drive specifications 43