HoMedics AF-75 Downloadable Instruction Book - Page 5
After cleaning or replacing the HEPA filter, be sure to reset - af 75fl
View all HoMedics AF-75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
4. Place the tabs at the bottom of the grill plate into the base of the unit. Gently push the grill plate back into place until you hear a click sound indicating that the grill is firmly latched. Fig. 4 Plug the power cord into a standard Fig. 4 AC outlet. NOTE: Unit will not operate unless filter and grill are properly installed. 1. On/Off and Fan Speed Settings • To turn the air cleaner on, press the ON/OFF Control. When the air cleaner is on, the ON/OFF Control will illuminate and the air cleaner will start to operate on LOW speed. • This air cleaner has 3 fan speed settings: LOW (1), MEDIUM (2), and HIGH (3). The higher the fan speed setting, the more air will be cleaned. To select or change fan speed, slide the FAN SPEED Control until desired speed is reached. • To turn the air cleaner off, press the ON/OFF Control. Clean Filter Indicator Button This air cleaner is equipped with a CLEAN FILTER indicator button to let you know when the HEPA filter requires cleaning. Generally this is every 480 hours of use. When the HEPA filter requires cleaning, the CLEAN FILTER indicator button on the control panel will illuminate. If the air cleaner is used daily, we recommend cleaning the HEPA filter more frequently. Replacing HEPA Filter With regular cleaning the life of the HEPA filter is approximately 12-18 months under typical household usage and conditions. We recommend replacing your filter every year. To purchase replacement HEPA filters, model # AF-75FL, go back to your retailer (where you purchased your air cleaner), or visit www.homedics.com. After cleaning or replacing the HEPA filter, be sure to reset the filter indicator by pressing the CLEAN/RESET FILTER INDICATOR BUTTON for several seconds until an audible chime sounds and the light turns off. 8 9