HoMedics BPA-100 User Manual - Page 13

CLEARING VALUES FROM MEMORY 1. Press the User-Select button to select User 1 or User 2. / START STOP 2. Continue to press the "M" button for approximately 5 seconds, then the data for the selected user will be erased automatically. / START STOP Note: The data stored in memory for both users may be erased if any of the batteries are removed or if the power source is lost when using an AC adapter. (Users should first record the data in a Blood Pressure log before replacing or removing batteries or power source.) IMPORTANT NOTES REGARDING YOUR BLOOD PRESSURE MEASUREMENT • Take your reading in a comfortable environment as measurements can be affected by hot or cold temperatures. Take your blood pressure at normal body temperature. 23 • Do not move or talk during measurement as this can elevate readings. • Do not move or cross legs during measurement. Keep feet flat on floor. • Do not touch cuff or monitor during measurement procedure. • It is suggested that you take your measurements at the same time each day and use the same arm for consistency. • Users should wait a minimum of 5 minutes before taking additional measurements. More time may be necessary depending upon your physiology. • The measurement results that users receive are for reference only. If users have any blood pressure concerns, please consult a physician. • Once inflation reaches 300 mmHg, the unit will deflate automatically for safety reasons. • This product is not suitable for people with arrhythmias. • This device may have difficulty determining the proper blood pressure for users with diabetes, poor circulation of blood, kidney problems, or for users who have suffered a stroke. 24