HoMedics SP-100H Downloadable Instruction Book - Page 3

Caution: To avoid pinching do not lean on Shiatsu massage mechanism in the pillow when adjusting your body position. Do not jam or force any part of your body in the moving massage mechanism. • This product should NEVER be used by any individual suffering from any physical ailment that would limit the user's capacity to operate the controls or who has sensory deficiencies. • This product is not for use in automobiles. • Household use only. Instructions for Use To reduce the risk of electric shock, this appliance is equipped with a polarized plug (one blade wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. It it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. Insert the power cord into a 120 volt AC outlet. To activate the Shiatsu massage action, press power button once (Figure 1). To activate the vibration massage, press the power button a second time. To activate Shiatsu and vibration massage together, press the power button a third time. To activate soothing heat with the massage, press the heat button. Massage heads will glow red (Figure 2). Allow a few moments for the heating action to warm up. When finished press the power button again to turn off the massage and heat function and unplug the pillow. The Shiatsu Pillow is very versatile and designed for use on the neck, back and shoulders (see Figures 3 and 4). However, you may find it works well for other body areas as well. NOTE: For the neck and shoulders it may work better to use the pillow upside down as shown in Figure 5. Maintenance To Store Place massager in its box or in a safe, dry, cool place. Avoid contact with sharp edges or pointed objects which might cut or puncture the fabric surface. To avoid breakage, do not wrap the power cord around the unit. Do not hang the unit by the power cord. 4 NOTE: Only gentle force should be exerted against the unit in order to eliminate any/ all risk of injury. Figure 1 Figure 2 You may soften massage force by placing a towel between yourself and the unit. Figure 5 Figure 3 Figure 4 To Clean Unplug the unit and allow it to cool before cleaning. Spot clean only with a soft, slightly damp sponge. Never allow water or any other liquids to come into contact with the unit. • Do not immerse in any liquid to clean. • Never use abrasive cleaners, brushes, gasoline, kerosene, glass / furniture polish or paint thinner to clean. • Do not attempt to repair the Shiatsu Massage Pillow. There are no user serviceable parts. For service, call the Consumer Relations telephone number listed in the warranty section. FCC Statement Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: HoMedics is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 5