HoMedics UHE-CM15 Downloadable Instruction Book - Page 4
Unique Features and Specifications, How to Use - wicks
View all HoMedics UHE-CM15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Unique Features and Specifications Ultrasonic Technology This humidifier uses ultrasonic high frequency technology to convert the water into 1-5 million super particles that are dispersed into the air evenly. Wick Includes 1 wick 120V AC Adaptor Included Perfect for use at Home, in the Office, or On-The Go Voltage 5V DC Tank Capacity 650mL - 1.4 Pints How to Use Mist Spout Lock/Unlock Power ON/OFF Button Humidifier Top Water Reservoir Fig. 1 Spring Loaded Wick Fig. 2 Power ON/OFF Button Insert single pin plug into base of humidifier, then plug unit in to a 120 volt AC electrical outlet. Push the POWER Button once to turn unit on. Push POWER Button again to turn the unit off. How to Fill CAUTION: Before filling with water, turn power off and unplug. 1. To remove the mist spout, turn it to the right until the icons align in the "unlock" position. Lift up to remove the mist spout and set it aside. (See Fig. 3) 2. NOTE: For first time use and with each new wick, you must soak the wick before operating. Unlock the spring loaded wick by turning the wick holder to the left. Remove the wick from the wick holder and soak the wick in water for 2 minutes. Return the wick to the wick holder and secure to the humidifier top cover by turning to the right. (See Fig. 4) CAUTION: DO NOT operate the humidifier without first soaking the wick. The humidifier WILL NOT function without a wick or if the wick is dry. 3. Fill the water tank with clean, cool (not cold) tap water to the MAX FILL line. DO NOT OVERFILL. We recommend using distilled water if you live in a hard water area. (See Fig. 5) 4. Place the mist spout back on the unit, making sure the icons align in the "unlock" position. Lock into place by turning the mist spout to the left until the icons are aligned in the "lock" position. (See Fig. 6A & 6B) NOTE: Be sure to wipe away any excess water from the top of the tank before replacing the mist spout. 5. Plug adaptor into standard wall outlet. 6. To turn on, press the POWER Button. The POWER Button will illuminate when the humidifier is ON. NOTE: This humidifier does not include an Auto Shut-off when the unit runs out of water. The unit MUST be unplugged when not in use. Refill or turn off before the tank runs dry. Never leave humidifier on if you will be away for more than 6 hours. Fig. 3 Unlock Lock Fig. 4 Fig. 5 Fig. 6A Fig. 6B 6 7