HoMedics UHE-CM15 Downloadable Instruction Book - Page 5

How to Change Wick 1. Remove replacement wick from package and soak in water for 2 minutes. 2. Remove the mist spout by turning it to the right until the icons align in the "unlock position. Lift up to remove the mist spout and set it aside. 3. Unlock the spring loaded wick by turning the wick holder to the left and removing from the top cover. (Fig. 4) 4. Remove the old wick from the wick holder and discard. 5. Place the new, soaked wick into the wick holder. 6. Place the wick holder back on the unit and lock into place by turning the holder to the right. NOTE: To order additional replacement wicks, please visit www.homedics.com or call HoMedics Consumer Relations at 1.800.466.3342 Cleaning and Care CAUTION: Before cleaning the unit, turn power off and disconnect single pin plug. Tank Cleaning Remove the mist spout from the water tank. We suggest cleaning the water tank once every two to three weeks, depending on your water conditions. Clean tank using a 50/50 mix of vinegar and water. Ultrasonic Membrane Cleaning To clean the ultrasonic membrane, you must first remove the spring loaded wick. Remove the mist spout. (See Fig. 4) Make a solution of mild dish soap and water. Dip a soft bristle brush into the solution and brush ultrasonic membrane. Wipe clean with a soft cloth. Clean both sides of membrane. (See Fig. 7) NOTE: DO NOT pour water into the ultrasonic membrane or submerge in water. Surface Cleaning Clean the surface of the unit with a clean damp soft cloth. (Fig. 8) Fig. 7 Fig. 8 8 9